Oakton, VA

Fence Company in Oakton, VA

Super Fabrications fences Oakton's mature lots and sloped yards with wood privacy, vinyl, and black aluminum — raked panels, wrapped trees, and gates that stay square. A licensed, bonded, and insured VA Class A contractor, we serve Fairfax County with free on-site estimates and handle the permit and locate steps for you.

Fence installation in Oakton

What we build in Oakton

Oakton's lots grew up under big oaks and maples, and the fences here live in shade. Wood privacy — shadowbox or board-on-board — handles the damp corners well because individual boards can be refreshed; vinyl suits owners who would rather wash a panel than stain one. Black aluminum wraps the garden beds and pool corners where the tree canopy opens up.

Grade is the local signature. Panels rake bay by bay down Oakton's slopes, posts step with heavier concrete where the yard falls away, and fence lines curve around root zones instead of cutting through them. Gates land on the level pads that already exist — patios, walk aprons — and get adjustable hinges so years of frost heave never rack the leaf.

Sloped, wooded Oakton yards do well with wood fence installation along the rear and aluminum fence installation around gardens and pools.

Cedar stockade privacy fence, under Fence Installation in Oakton
Wood privacy installed in Oakton, VA, under Fence Installation in Oakton
Wood privacy — Super Fabrications work in the Oakton area
Vinyl privacy installed in Oakton, VA, under Fence Installation in Oakton
Vinyl privacy — Super Fabrications work in the Oakton area
Aluminum and gates installed in Oakton, VA, under Fence Installation in Oakton
Aluminum and gates — Super Fabrications work in the Oakton area

Repair and replacement

Fence repair and replacement in Oakton

Shade and slope give Oakton fences their quirks — rot on the damp side, heave on the low side. We fix the actual failure, then tell you where the next one will come from.

Recent work

Fences we have built near Oakton

Photos below are finished Super Fabrications jobs from around Northern Virginia — sloped and wooded lots included. We photograph our own work only. See how the panels meet grade before you choose a style.

Cost

What fences cost in Oakton

Slopes add footing work flat lots skip, which shows up in Oakton quotes as labor, not material. Ranges hold steady — wood $30–$60, vinyl $40–$70 per linear foot installed — and your estimate confirms the number.

Typical planning ranges for Oakton — verify current pricing on your estimate
Wood privacy (per linear foot, installed)$30–$60
Vinyl privacy (per linear foot, installed)$40–$70
Aluminum open fence (per linear foot, installed)$40–$75
Walk gate$600–$1,500
Old fence removalQuoted on the estimate

Read the full fence cost guide for Northern Virginia and Maryland.

Permits

Fence permits in Oakton

Fairfax County rules govern Oakton addresses: residential fences generally skip the building permit, front yards hold at 4 feet (7 feet on 2-acre-plus lots, or 6 feet by variance), and side and rear runs may reach 7 feet. Corner lots count both street-facing yards as front yards. The county's Land Development Services Permit Application Center resolves the edge cases, and we bring them the questions rather than assumptions.

The working sequence stays the same as everywhere we build: Miss Utility at 811 locates buried lines free of charge before digging, associations clear styles where they apply, and stakes mark the line on your property before materials arrive. Pool barriers meet the 48-inch Virginia minimum with self-closing, self-latching gates on the pool side.

Wood stockade fence with cap and trim detail, under Fence Permits in Oakton

FAQ

Oakton fence questions

Do you need a permit for a fence in Oakton, VA?

Oakton fences generally need no Fairfax County building permit — zoning still applies, with 4-foot front yards, up to 7 feet on sides and rears, and corner-lot front rules on both street sides. We confirm anything unusual with the county's LDS Permit Application Center and handle the Miss Utility locate at 811 before digging.

How much does a fence cost in Oakton, VA?

A typical planning range for Oakton: wood privacy $30–$60 per linear foot installed, vinyl $40–$70, black aluminum $40–$75, walk gates $600–$1,500. Slopes add footing work that flat lots skip. Your estimate confirms the number.

How do you fence around a mature oak?

We measure the root zone, then curve the line around it — vinyl and aluminum both bend to a planned arc, and wood can turn the corner in a pinwheel. Posts stay outside the critical roots, and the Miss Utility locate rules out surprises underground. The tree keeps its canopy; the fence keeps its line.

Shadowbox or solid board for a shared Oakton line?

Shadowbox shows the same face to both yards and breathes in wind; solid board-on-board gives the tighter screen. On a shared line we usually ask which neighbor holds the maintenance preference, because the answer decides the style. Both set on the same posts and footings.

Will a wood fence survive the shade?

Pressure-treated lumber handles damp shade, but it ages faster than a sunny run — plan on a staining cycle and occasional board swaps. Vinyl ignores the shade entirely at a higher start price. We quote both with maintenance in the footnote, not hidden.

Reviews

What customers say about working with us

★★★★★

Super fabrications did a fantastic job on our fence! They were prompt, courteous, and price competitive. I highly recommend them if you're shopping for a fence.

★★★★★

Ray was professional and his team worked through the day with no break to finish my fence project, also I had a little issue with the installation but he sent his people back to rectify, very pleased with the service.

Read more Super Fabrications reviews

Estimate

Get a free fence estimate

Tell us the Oakton address, the fence you have in mind, and whether the old one comes out. If you would rather talk now, call (888) 820-6099.

Ask about financing when you request the estimate.

Call (888) 820-6099